Every line held to a named
standard and a named mill.
Malleable iron fittings
Cast iron annealed to malleable iron for domestic, industrial, machine and plant engineering applications.
-
Standard
ANSI B2.1, DIN 2999 for #150
-
Size
1/8" – 6"
-
Types
Elbow 45°/90°, street and reducing elbow, tee, union, hex nipple, plug, coupling
-
Finish
Black and galvanized
Butt-weld fittings
Welded fittings for pressure piping where a full-penetration joint and a smooth bore are required.
-
Standard
ASME B16.9, B16.28
-
Size
1/2" – 48", larger on request
-
Material
Carbon steel SA234 WPB, high-yield MSS-SP75, low-alloy SA420 WPL6
-
Types
Elbow 45°/90°, equal tee, reducing tee, end cap, concentric and eccentric reducer
Forged steel fittings
High-pressure threaded and socket-weld fittings for small-bore process, instrument and utility lines.
-
Standard
NPT or SW, Class 3000 / 6000 / 9000
-
Size
1/4" – 4"
-
Types
Elbow, tee, cap, union, plug, hex nipple, coupling, welding boss, threadolet, weldolet
-
Swages
Concentric and eccentric, SCH-80, SCH-160, S-XXS, TBE, PBE, BBE
Stainless steel fittings
Corrosion-resistant threaded and welded fittings for marine, desalination, food and chemical service.
-
Standard
ASME B16.9, B16.28, MSS-SP43 / SP75
-
Grade
SA403 WP304, 304L, 304H, WP316, 316L
-
Size
1/2" – 48", larger on request
-
Types
Elbow, coupling, end cap, tee, hex nipple, union, reducers
Grooved fittings
Grooved piping is faster to install than welding, threading or flanging, giving the lowest installed cost on fire and utility systems.
-
Size
1" – 12"
-
Material
Steel, segmentally welded steel or ductile iron
-
Types
Elbow, coupling, end cap, tee, mechanical tee, flanges, reducers
-
Gasket
Tri-seal C-shaped pressure-responsive rubber
Copper fittings
Copper remains the prime material for conveying water — light, strong and corrosion resistant across domestic, commercial and industrial buildings.
-
Service
Potable water, HVAC, medical gas
-
Types
Elbow, tee, coupling, reducer, adaptor
-
Jointing
Capillary solder and press fit
PVC, CPVC & PPR fittings
Thermoplastic fittings for pressurised irrigation, water adduction, chemical installation and water treatment.
-
PVC / uPVC
SCH-40, SCH-80, Class 3/4/5, 1/2" – 8" (20 – 710mm)
-
CPVC
SCH-80, 1/2" – 8"
-
PPR
PN25, 20mm – 125mm
-
Types
Elbow, coupling, tee, end cap, union, male and female adaptor, flanges
The rest of the range.
Send us your fittings requirement.
Send a bill of quantities, a drawing or a line list. We confirm grade, schedule and standard before pricing, and state the lead time in writing.